C613-50055-01 REV A Command Reference for x230 Series Edge Switches 255
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
LOGGING COMMANDS
LOG
CONSOLE (FILTER)
command. This filter may be removed and replaced by filters that are more
selective.
Mode Global Configuration
Examples To create a filter to send all messages generated by MSTP that have a severity of
info or higher to console instances where the log console command has been
given, remove the default filter that includes everything use the following
commands:
awplus# configure terminal
awplus(config)# log console level info program mstp
and then use the command:
awplus(config)# log console level info program mstp
To create a filter to send all messages containing the text “Bridging
initialization” to console instances where the log console command has
been given use the following commands:
awplus# configure terminal
awplus(config)# log console msgtext "Bridging initialization"
To remove a filter that sends all messages generated by EPSR that have a severity
of notices or higher to consoles use the following commands:
awplus# configure terminal
awplus(config)# no log console level notices program epsr
To remove a default filter that includes sending critical, alert and
emergency level messages to the console use the following commands:
awplus# configure terminal
awplus(config)# no log console level critical
Validation
Commands
show log config
Related
Commands
log console
To Next Page
Loading...
Need help?
General
