C613-50055-01 REV A Command Reference for x230 Series Edge Switches 105
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
USER ACCESS COMMANDS
USERNAME
Usage An intermediate CLI security level (privilege level 7 to privilege level 14) allows a
CLI user access to the majority of show commands, including the platform show
commands that are available at privilege level 1 to privilege level 6). Note that
some show commands, such as show running-configuration and show
startup-configuration, are only available at privilege level 15.
A privilege level of 0 can be set for port authentication purposes from a RADIUS
server.
Examples To create the user bob with a privilege level of 15, for all show commands
including show running-configuration and show startup-configuration and to
access configuration commands in Privileged Exec command mode, and the
password bobs_secret, use the commands:
awplus# configure terminal
awplus(config)# username bob privilege 15 password bobs_secret
To create a user junior_admin with a privilege level of 7, for intermediate CLI
security level access for most show commands, and the password show_only,
use the commands:
awplus# configure terminal
awplus(config)# username junior_admin privilege 7 password
show_only
Related
Commands
enable password
security-password minimum-categories
security-password minimum-length
To Next Page
Loading...
Need help?
General
