C613-50055-01 REV A Command Reference for x230 Series Edge Switches 1115
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
DHCP SNOOPING COMMANDS
SERVICE
DHCP-SNOOPING
Examples To enable DHCP snooping on the switch, use the command:
awplus# configure terminal
awplus(config)# service dhcp-snooping
To disable DHCP snooping on the switch, use the command:
awplus# configure terminal
awplus(config)# no service dhcp-snooping
Related
Commands
ip dhcp snooping
ip dhcp snooping database
ip dhcp snooping max-bindings
show ip dhcp snooping
To Next Page
Loading...
