Allied Telesis AlliedWare Plus AT-x230-10GP - Page 112

112 Command Reference for x230 Series Edge Switches C613-50055-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
FILE MANAGEMENT COMMANDS
BOOT
CONFIG-FILE
To remove the configuration file branch.cfg stored on the device’s SD card
filesystem the next time the device boots up, use the commands:
awplus# configure terminal
awplus(config)# no boot config-file card:/branch.cfg
Related
Commands
boot config-file backup
boot system
boot system backup
show boot