1120 Command Reference for x230 Series Edge Switches C613-50055-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
DHCP SNOOPING COMMANDS
SHOW
ARP SECURITY STATISTICS
Example To display the brief statistics for the ARP security, use the command:
awplus# show arp security statistics
Table 32-5: Example output from the show arp security statistics command
awplus# show arp security statistics
DHCP Snooping ARP Security Statistics:
In In
Interface Packets Discards
---------------------------------
port1.0.3 20 20
port1.0.4 30 30
port1.0.12 120 0
Table 32-6: Parameters in the output from the show arp security statistics
command
Parameter Description
Interface A port name. Parentheses indicate that ports are configured for
provisioning.
In Packets The total number of incoming ARP packets that are processed by
DHCP Snooping ARP Security
In
Discards
The total number of ARP packets that are dropped by DHCP Snooping
ARP Security.
To Next Page
Loading...
