Allied Telesis AlliedWare Plus AT-x230-10GP User Manual

C613-50055-01 REV A Command Reference for x230 Series Edge Switches 1131
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
DHCP SNOOPING COMMANDS
SHOW
IP DHCP SNOOPING INTERFACE
Related
Commands
show ip dhcp snooping
show ip dhcp snooping statistics
show running-config dhcp
Table 32-17: Parameters in the output from the show ip dhcp snooping
interface command
Parameter Description
Port The port interface name.
Status The port status: untrusted (default) or trusted.
Full Leases The number of entries in the DHCP snooping database for the
port.
Max Leases The maximum number of entries that can be stored in the
database for the port.
Action The DHCP snooping violation actions for the port.
Subscriber
ID
The subscriber ID for the port. If the subscriber ID is longer than 34
characters, only the first 34 characters are displayed. To display
the whole subscriber ID, use the show running-config dhcp
command.

Allied Telesis AlliedWare Plus AT-x230-10GP Specifications

General

Brand	Allied Telesis
Model	AlliedWare Plus AT-x230-10GP
Category	Switch
Language	English