1192 Command Reference for x230 Series Edge Switches C613-50055-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
AMF COMMANDS
ATMF
GROUP (MEMBERSHIP)
Example 1 To specify the device to become a member of AMF groups named marketing, sales,
and building_2, use the following commands:
node-1# configure terminal
node-1(config)# atmf group marketing,sales,building_2
Example 2 To add the nodes member_node_1 and member_node_2 to groups building1 and
sales, first add the nodes to the working-set:
master_node# atmf working-set member_node_1,member_node_2
This command returns the following output confirming that the nodes
member_node_1 and member_node_2 are now part of the working-set:
Then add the members of the working set to the groups:
atmf-net[2]# configure terminal
atmf-net[2](config)# atmf group building1,sales
atmf-net[2](config)# exit
atmf-net[2]# show atmf group
This command returns the following output displaying the groups that are
members of the working-set.
Related
Commands
show atmf group
show atmf group members
============================
member_node_1, member_node_2
============================
Working set join
====================
member_node_1
====================
AMF group information
building1, sales
To Next Page
Loading...
