C613-50055-01 REV A Command Reference for x230 Series Edge Switches 1201
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
AMF COMMANDS
ATMF
PROVISION NODE CLONE
Example To copy from the backup of device2 to create backup files for the new provisioned
node device3 use the following command:
device1# atmf provision node device3 clone device2
Figure 35-1: Sample output from the atmf provision node clone command
To confirm that a new provisioned node has been cloned, use the command:
device1# show atmf backup
The output from this command is shown in the following figure, and shows the
details of the new provisioned node device3.
Figure 35-2: Sample output from the show atmf backup command
device1#atmf provision node device3 clone device2
Copying...
Successful operation
device1#show atmf backup
Scheduled Backup ...... Enabled
Schedule ............ 1 per day starting at 03:00
Next Backup Time .... 01 Jan 2014 03:00
Backup Bandwidth ...... Unlimited
Backup Media .......... USB (Total 7446.0MB, Free 7297.0MB)
Server Config .........
Synchronization ..... Unsynchronized
Last Run .......... -
1 .................. Unconfigured
2 .................. Unconfigured
Current Action ........ Idle
Started ............. -
Current Node ........ -
---------------------------------------------------------------
Node Name Date Time In ATMF On Media Status
---------------------------------------------------------------
device3 - - No Yes Prov
device1 01 Jan 2014 00:05:49 No Yes Good
device2 01 Jan 2014 00:05:44 Yes Yes Good
To Next Page
Loading...
