Allied Telesis AlliedWare Plus AT-x230-10GP - Page 1361

C613-50055-01 REV A Command Reference for x230 Series Edge Switches 1361
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
SNMP COMMANDS
SNMP
-SERVER HOST
Mode Global Configuration
Examples To configure the device to send generated traps to the IPv4 host destination
192.0.2.5 with the SNMPv2c community name public, use the following
command:
awplus# configure terminal
awplus(config)# snmp-server host version 2c public192.0.2.5
To configure the device to send generated traps to the IPv6 host destination
2001:db8::8a2e:7334 with the SNMPv2c community name private, use the
following command:
awplus# configure terminal
awplus(config)# snmp-server host version 2c
private2001:db8::8a2e:7334
To remove a configured trap host of 192.0.2.5 with the SNMPv2c community name
public, use the following command:
awplus# configure terminal
awplus(config)# no snmp-server host version 2c public192.0.2.5
Related
Commands
snmp trap link-status
snmp-server enable trap
snmp-server view
auth Authentication.
noauth No authentication.
priv Encryption.
<community-name> The SNMPv1 or SNMPv2c community name.
<user-name> SNMPv3 user name.
Parameter Description