C613-50055-01 REV A Command Reference for x230 Series Edge Switches 1409
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
LLDP COMMANDS
SHOW
LLDP
Related
Commands
show lldp interface
show running-config lldp
Tx Delay The transmission delay. This is the minimum time interval
between transmitting advertisements due to a change in
LLDP local information.
Port Number Type The type of port identifier used to enumerate LLDP MIB
local port entries, as set by the lldp port-number-type
command.
Fast Start Count The number of times fast start advertisements are sent for
LLDP-MED.
Total Neighbor
Count
Number of LLDP neighbors discovered on all ports.
Neighbors table
last updated
The time since the LLDP neighbor table was last updated.
Table 41-3: Parameters in the output of the show lldp command (cont.)
Parameter Description
To Next Page
Loading...
