Allied Telesis AlliedWare Plus AT-x230-10GP - Page 1468

1468 Command Reference for x230 Series Edge Switches C613-50055-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
TRIGGER COMMANDS
SHOW
TRIGGER
Figure 44-4: Example output from the show trigger counter command
Related
Commands
trigger
awplus#show trigger counter
Trigger Module Counters
------------------------------------------------------
Trigger activations ........................... 0
Time triggers activated today ................. 0
Periodic triggers activated today ............. 0
Interface triggers activated today ............ 0
Resource triggers activated today ............. 0
Reboot triggers activated today ............... 0
Ping-poll triggers activated today ............ 0
------------------------------------------------------
Table 44-5: Parameters in the output of the show trigger counter command
Parameter Description
Trigger activations Number of times a trigger has been activated.
Time triggers
activated today
Number of times a time trigger has been activated
today.
Periodic triggers
activated today
Number of times a periodic trigger has been activated
today.
Interface triggers
activated today
Number of times an interface trigger has been
activated today.
Resource triggers
activated today
Number of times a CPU or memory resource trigger has
been activated today.
Ping-poll triggers
activated today
Number of times a ping-poll trigger has been activated
today.