C613-50055-01 REV A Command Reference for x230 Series Edge Switches 1471
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
TRIGGER COMMANDS
TIME
(TRIGGER)
Usage For example trigger configurations that use the time (trigger) command, see
“Restrict Internet Access” and “Turn off Power to Port LEDs” in the Triggers Feature
Overview and Configuration Guide.
Examples To allow trigger 63 to activate between midnight and 10:30am, use the
commands:
awplus# configure terminal
awplus(config)# trigger 63
awplus(config-trigger)# time before 10:30:00
To allow trigger 64 to activate between 3:45pm and midnight, use the commands:
awplus# configure terminal
awplus(config)# trigger 64
awplus(config-trigger)# time after 15:45:00
To allow trigger 65 to activate between 10:30am and 8:15pm, use the commands:
awplus# configure terminal
awplus(config)# trigger 65
awplus(config-trigger)# time after 10:30:00 before 20:15:00
Related
Commands
show trigger
trigger
To Next Page
Loading...
Need help?
General
