C613-50055-01 REV A Command Reference for x230 Series Edge Switches 1503
AlliedWare Plusâ„¢ Operating System - Version 5.4.5-0.x
PING-POLLING COMMANDS
SHOW
COUNTER PING-POLL
Example To display counters for the polling instances, use the command:
awplus# show counter ping-poll
Related
Commands
debug ping-poll
ping-poll
show ping-poll
CurrentFailCount The number of ping requests that have not received a
ping reply in the current sample-size window.
UpStateEntered Number of times the target device has entered the Up
state.
DownStateEntered Number of times the target device has entered the
Down state.
Table 45-2: Parameters in output of the show counter ping-poll command
Parameter Description