Allied Telesis AlliedWare Plus AT-x230-10GP - Page 196

196 Command Reference for x230 Series Edge Switches C613-50055-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
SYSTEM CONFIGURATION AND MONITORING COMMANDS
SHOW
CPU
Output Figure 5-2: Example output from the show cpu command
CPU averages:
1 second: 12%, 20 seconds: 2%, 60 seconds: 2%
System load averages:
1 minute: 0.03, 5 minutes: 0.02, 15 minutes: 0.00
Current CPU load:
userspace: 6%, kernel: 4%, interrupts: 1% iowaits: 0%
user processes
==============
pid name thrds cpu% pri state sleep% runtime
1544 hostd 1 2.8 20 run 0 120
1166 exfx 17 1.8 20 sleep 0 3846
1198 stackd 1 0.9 20 sleep 0 459
1284 aisexec 44 0.9 -2 sleep 0 2606
1 init 1 0.0 20 sleep 0 120
9772 sh 1 0.0 20 sleep 0 0
9773 corerotate 1 0.0 20 sleep 0 0
853 syslog-ng 1 0.0 20 sleep 0 356
859 klogd 1 0.0 20 sleep 0 1
910 inetd 1 0.0 20 sleep 0 3
920 portmap 1 0.0 20 sleep 0 0
931 crond 1 0.0 20 sleep 0 1
1090 openhpid 11 0.0 20 sleep 0 233
1111 hpilogd 1 0.0 20 sleep 0 0
1240 hsl 1 0.0 20 sleep 0 79
1453 authd 1 0.0 20 sleep 0 85
1497 cntrd 1 0.0 20 sleep 0 2
1520 epsrd 1 0.0 20 sleep 0 56
1571 imi 1 0.0 20 sleep 0 275
1594 irdpd 1 0.0 20 sleep 0 23
1617 lacpd 1 0.0 20 sleep 0 87
1638 mstpd 1 0.0 20 sleep 0 75
1662 nsm 1 0.0 20 sleep 0 163
1685 ospfd 1 0.0 20 sleep 0 35
1708 pdmd 1 0.0 20 sleep 0 23
1729 pimd 1 0.0 20 sleep 0 32
1751 ripd 1 0.0 20 sleep 0 33
1775 ripngd 1 0.0 20 sleep 0 25
1797 rmond 1 0.0 20 sleep 0 64
1963 ntpd 1 0.0 20 sleep 0 15
...
Table 5-2: Parameters in the output of the show cpu command
Parameter Description
CPU averages Average CPU utilization for the periods stated.
System load
averages
The average number of processes waiting for CPU time for the
periods stated.
Current CPU
load
Current CPU utilization specified by load types.