C613-50055-01 REV A Command Reference for x230 Series Edge Switches 305
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
INTERFACE COMMANDS
SHOW
INTERFACE STATUS
To display the status of all ports, use the commands:
awplus# show interface status
Table 8-3: Example output from the show interface status command
awplus#sho int status
Port Name Status Vlan Duplex Speed Type
port1.0.1 Trunk_Net connected trunk a-full a-1000 1000BaseTX
port1.0.2 Access_Net1 connected 5 full 100 1000BaseTX
port1.0.3 Access_Net1 disabled 5 auto auto 1000BaseTX
port1.0.4 Access_Net2 connected 6 a-half a-100 1000BaseTX
port1.0.5 Private_Prom connected 10 a-full a-100 1000BaseTX
port1.0.6 Private_Net1 connected 10,11 a-full a-100 1000BaseTX
port1.0.7 Private_Net2 connected 10,12 a-full a-100 1000BaseTX
port1.0.8 notconnect 1 auto auto 1000BaseTX
.
.
port1.0.23
disabled 1 auto auto not present
port1.0.24
notconnect 1 auto auto unknown
sa1
notconnect trunk auto auto
Table 8-4: Parameters in the output from the show interface status command
Parameter Description
Port Name/Type of the interface.
Name Description of the interface.
Status The administrative and operational status of the interface; one of:
• disabled: the interface is administratively down.
• connect: the interface is operationally up.
• notconnect: the interface is operationally down.
Vlan VLAN type or VLAN IDs associated with the port:
• When the VLAN mode is trunk, it displays trunk (it does not
display the VLAN IDs).
• When the VLAN mode is access, it displays the VLAN ID.
• When the VLAN mode is private promiscuous, it displays the
primary VLAN ID if it has one, and promiscuous if it does not
have a VLAN ID.
• When the VLAN mode is private host, it displays the primary
and secondary VLAN IDs.
• When the port is an Eth port, it displays none: there is no VLAN
associated with it.
• When the VLAN is dynamically assigned, it displays the current
dynamically assigned VLAN ID (not the access VLAN ID), or
dynamic if it has multiple VLANs dynamically assigned.
To Next Page
Loading...
