324 Command Reference for x230 Series Edge Switches C613-50055-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
SWITCHING COMMANDS
DEBUG
PLATFORM PACKET
To enable packet debug for sFlow packets only for the default timeout of 5
minutes, enter:
awplus# debug platform packet sflow
To enable send packet debug with no timeout, enter:
awplus# debug platform packet send timeout 0
To enable VLAN packet debug for VLAN 2 with a timeout duration of 3 minutes,
enter:
awplus# debug platform packet vlan 2 timeout 150
To disable receive packet debug, enter:
awplus# no debug platform packet recv
Related
Commands
show debugging platform packet
undebug platform packet
To Next Page
Loading...
