C613-50055-01 REV A Command Reference for x230 Series Edge Switches 365
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
SWITCHING COMMANDS
SHOW
STORM-CONTROL
Output Figure 10-15: Example output from the show storm-control command for all
ports
Related
Commands
storm-control level
awplus#show storm-control
Port BcastLevel McastLevel DlfLevel
port1.0.1 100.0% 100.0% 100.0%
port1.0.2 100.0% 100.0% 100.0%
port1.0.3 100.0% 100.0% 100.0%
port1.0.4 100.0% 100.0% 100.0%
port1.0.5 100.0% 100.0% 100.0%
port1.0.6 100.0% 100.0% 100.0%
port1.0.7 100.0% 100.0% 100.0%
port1.0.8 100.0% 100.0% 100.0%
port1.0.9 100.0% 100.0% 100.0%
port1.0.10 100.0% 100.0% 100.0%
port1.0.11 100.0% 100.0% 100.0%
port1.0.12 100.0% 100.0% 100.0%
port1.0.13 100.0% 100.0% 100.0%
port1.0.14 100.0% 100.0% 100.0%
port1.0.15 100.0% 100.0% 100.0%
port1.0.16 100.0% 100.0% 100.0%
port1.0.17 100.0% 100.0% 100.0%
port1.0.18 100.0% 100.0% 100.0%
port1.0.19 100.0% 100.0% 100.0%
port1.0.20 100.0% 100.0% 100.0%
port1.0.21 100.0% 100.0% 100.0%
port1.0.22 100.0% 100.0% 100.0%
port1.0.23 100.0% 100.0% 100.0%
port1.0.24 100.0% 100.0% 100.0%
To Next Page
Loading...
