Allied Telesis AlliedWare Plus AT-x230-10GP - Page 370

370 Command Reference for x230 Series Edge Switches C613-50055-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
SWITCHING COMMANDS
THRASH
-LIMITING
To set the thrash limiting action to its default, use the following command:
awplus(config-if)# no thrash-limiting action
To set the thrash limiting timeout to its default, use the following command:
awplus(config-if)# no thrash-limiting timeout
Related
Commands
loop-protection
loop-protection action
loop-protection timeout
show loop-protection