Allied Telesis AlliedWare Plus AT-x230-10GP - Page 504

504 Command Reference for x230 Series Edge Switches C613-50055-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
LINK AGGREGATION COMMANDS
STATIC
-CHANNEL-GROUP
To reference the pre-defined static channel group 2 as an interface apply the
example commands as below:
awplus# configure terminal
awplus(config)# interface port1.0.6
awplus(config-if)# static-channel-group 2
awplus(config-if)# exit
awplus(config)# interface port.1.0.8
awplus(config-if)# static-channel-group 2
awplus(config-if)# exit
awplus(config)# interface sa2
awplus(config-if)#
Related
Commands
show static-channel-group