C613-50055-01 REV A Command Reference for x230 Series Edge Switches 515
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
POWER OVER ETHERNET COMMANDS
POWER
-INLINE MAX
See the PoE Feature Overview and Configuration Guide for further information
about the difference between the power supplied from the PSE and the power
available at the PD.
Examples To set the maximum power supplied to ports in the range1.0.2 to 1.0.4 to
6450mW per port, use the following commands:
awplus# configure terminal
awplus(config)# interface port1.0.2-port1.0.4
awplus(config-if)# power-inline max 6450
To set the maximum power supplied to port1.0.2, to 6450 mW, use the
following commands:
awplus# configure terminal
awplus(config)# interface port1.0.2
awplus(config-if)# power-inline max 6450
To clear the user-configured maximum power supplied to port1.0.2, and revert
to using the default maximum power of 30000 mW, use the following commands:
awplus# configure terminal
awplus(config)# interface port1.0.2
awplus(config-if)# no power-inline max
Validation
Commands
show power-inline interface
show running-config power-inline
To Next Page
Loading...
