Allied Telesis AlliedWare Plus AT-x230-10GP - Page 517

C613-50055-01 REV A Command Reference for x230 Series Edge Switches 517
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
POWER OVER ETHERNET COMMANDS
POWER
-INLINE PRIORITY
To reset the priority level to the default for port1.0.2, use the following
commands:
awplus# configure terminal
awplus(config)# interface port1.0.2
awplus(config-if)# no power-inline priority
Validation
Commands
show power-inline
show power-inline interface
show running-config power-inline
Related
Commands
power-inline usage-threshold