558 Command Reference for x230 Series Edge Switches C613-50055-01 REV A
AlliedWare Plusâ„¢ Operating System - Version 5.4.5-0.x
IP ADDRESSING AND PROTOCOL COMMANDS
SHOW
IP TRAFFIC
multicast bytes received Multicast bytes received
multicast bytes sent Multicast bytes sent
broadcast bytes received Broadcast bytes received
broadcast bytes sent Broadcast bytes sent
packets received Packets received
packets received with invalid
headers
Packets received with invalid headers
oversize packets received Oversize packets received
packets received with no route Packets received with no route
packets received with invalid
address
Packets received with invalid address
packets received with unknown
protocol
Packets received with unknown protocol
truncated packets received Truncated packets received
received packets discarded Received packets discarded
received packets delivered Received packets delivered
forwarded packets transmitted Forwarded packets transmitted
packets transmitted Packets transmitted
packets discarded on transmit Packets discarded on transmit
packets discarded on transmit
due to no route
Packets discarded on transmit due to no
route
fragment reassembly timeouts Fragment reassembly timeouts
fragment reassembly required Fragment reassembly required
fragment reassembly OK Fragment reassembly OK
fragment reassembly failures Fragment reassembly failures
fragmentations succeeded Fragmentations succeeded
fragmentations failed Fragmentations failed
fragments created Fragments created
ICMP6 ICMPv6 counters
messages received Messages received
errors received Errors received
messages sent Messages sent
TCP TCP counters
remote connections
established
Remote connections established
Table 15-5: Parameters in the output of the show ip traffic command (cont.)
Parameter Description