EasyManuals Logo

Allied Telesis AlliedWare Plus AT-x230-10GP User Manual

Allied Telesis AlliedWare Plus AT-x230-10GP
1536 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #569 background imageLoading...
Page #569 background image
C613-50055-01 REV A Command Reference for x230 Series Edge Switches 569
AlliedWare Plusâ„¢ Operating System - Version 5.4.5-0.x
IPV6 COMMANDS
IPV
6 ADDRESS
To remove the IPv6 address 2001:0db8::a2/64 from the VLAN interface vlan2, use
the following commands:
awplus# configure terminal
awplus(config)# interface vlan2
awplus(config-if)# no ipv6 address 2001:0db8::a2/64
To assign the eui64 derived address in the prefix 2001:db8::/48 to VLAN
interface vlan2, use the following commands:
awplus# configure terminal
awplus(config)# interface vlan2
awplus(config-fr-subif)# ipv6 address 2001:0db8::/48 eui64
To remove the eui64 derived address in the prefix 2001:db8::/48 from VLAN
interface vlan2, use the following commands:
awplus# configure terminal
awplus(config)# interface vlan2
awplus(config-fr-subif)# no ipv6 address 2001:0db8::/48 eui64
Validation
Commands
show running-config
show ipv6 interface brief
show ipv6 route
Related
Commands
ipv6 address autoconfig

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Allied Telesis AlliedWare Plus AT-x230-10GP and is the answer not in the manual?

Allied Telesis AlliedWare Plus AT-x230-10GP Specifications

General IconGeneral
BrandAllied Telesis
ModelAlliedWare Plus AT-x230-10GP
CategorySwitch
LanguageEnglish

Related product manuals