588 Command Reference for x230 Series Edge Switches C613-50055-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
IPV6 COMMANDS
SHOW
IPV6 ROUTE
Example 2 To display all database entries for an IP route, use the following command:
awplus# show ipv6 route database
Output Figure 16-4: Example output of the show ipv6 route database command
IPv6 Routing Table
Codes: C - connected, S - static > - selected route, * - FIB
route, p - stale info
Timers: Uptime
S ::/0 [1/0] via 2001::a:0:0:c0a8:a01 inactive, 6d22h12m
[1/0] via 2001::fa:0:0:c0a8:fa01 inactive, 6d22h12m
To Next Page
Loading...
