686 Command Reference for x230 Series Edge Switches C613-50055-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
IPV4 HARDWARE ACCESS CONTROL LIST (ACL) COMMANDS
ACCESS
-LIST (HARDWARE MAC NUMBERED)
To create an access-list that will copy-to-mirror packets with an initial MAC address
component of 0000.00ab and any destination address for use with the mirror
interface command, enter the commands:
awplus# configure terminal
awplus(config)# access-list 4001 copy-to-mirror 0000.00ab.1234
0000.0000.FFFF any
To destroy the access-list with an access-list identity of 4000 enter the commands:
awplus# configure terminal
awplus(config)# no access-list 4000
Related
Commands
access-group
mirror interface
show running-config
show access-list (IPv4 Hardware ACLs)
To Next Page
Loading...
