752 Command Reference for x230 Series Edge Switches C613-50055-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
IPV6 SOFTWARE ACCESS CONTROL LIST (ACL) COMMANDS
Sub-modes Many of the ACL commands operate from sub-modes that are specific to particular
ACL types. The following table shows the CLI prompts at which ACL commands are
entered.
Command List •“ipv6 access-list standard (named)” on page 753
•“(ipv6 access-list standard filter)” on page 755
•“show ipv6 access-list (IPv6 Software ACLs)” on page 757
Table 23-1: IPv6 Software Access List Commands and Prompts
Command Name Command Mode Prompt
show ipv6 access-list (IPv6 Software
ACLs)
Privileged Exec awplus#
ipv6 access-list standard (named) Global Configuration awplus(config)#
(ipv6 access-list standard filter) IPv6 Standard ACL
Configuration
awplus(config-ipv6-std-acl)#
To Next Page
Loading...
