Allied Telesis AlliedWare Plus AT-x230-10GP - Page 825

C613-50055-01 REV A Command Reference for x230 Series Edge Switches 825
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
802.1X COMMANDS
DOT
1X PORT-CONTROL
To disable port authentication on the interface port1.0.2, use the commands:
awplus# configure terminal
awplus(config)# interface port1.0.2
awplus(config-if)# no dot1x port-control
Validation
Commands
show dot1x interface
Related
Commands
aaa authentication dot1x