Allied Telesis AlliedWare Plus AT-x230-10GP - Page 864

864 Command Reference for x230 Series Edge Switches C613-50055-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
AUTHENTICATION COMMANDS
AUTH
ROAMING DISCONNECTED
Examples To enable Roaming Authentication disconnected feature for port1.0.2,
after enabling 802.1X-Authentication and enabling Roaming Authentication
enable, use the commands:
awplus# configure terminal
awplus(config)# interface port1.0.2
awplus(config-if)# dot1x port-control auto
awplus(config-if)# auth roaming enable
awplus(config-if)# auth roaming disconnected
To disable Roaming Authentication disconnected feature for port1.0.2, use the
commands:
awplus# configure terminal
awplus(config)# interface port1.0.2
awplus(config-if)# no auth roaming disconnected
Validation
Commands
show running-config
Related
Commands
auth-mac enable
auth roaming enable
auth-web enable
dot1x port-control
show auth-mac interface
show auth-web interface
show dot1x interface