DGS-6604 m clear ip bgp
CLI Reference Guide
96
Use the in keyword to clear only the inbound neighbor connections. Outbound
neighbor sessions will not be reset. Use this form of the command in the
following situations:
• Additions or modifications to BGP-related access lists.
• Modifying the BGP-related weights
• Modifying the BGP-related distribution lists
• Modifying the BGP-related route maps
If inbound routing tables are reset, all BGP routers must support route refresh
capability (RFC 2918).
Example In the following example, the BGP session is reset for BGP neighbor
172.5.78.12:
Switch# clear ip bgp 172.5.78.12
Switch#
To Next Page
Loading...
