DGS-6604 mm dos_prevention type
CLI Reference Guide
166
Default Disabled.
DoS prevention of all supported ATTACK-TYPE is disabled.
Command Mode Global configuration
Usage Guideline This command is used to enable/disable the DoS prevention mechanism for
specific attack types or for all supported types.
Examples The following example shows how to enable the DoS prevention mechanism for
a land_attack.
The following example shows how to enable the DoS prevention mechanism for
all supported types.
The following example shows how to disable the DoS prevention mechanism for
all supported types.
Syntax Description
- continued
all
All of the above types.
Switch# configure terminal
Switch(config)# dos_prevention type land_attack
Switch# configure terminal
Switch(config)# dos_prevention type all
Switch# configure terminal
Switch(config)# no dos_prevention type all
To Next Page
Loading...
