EasyManua.ls Logo

D-Link DGS-6600-48TS

D-Link DGS-6600-48TS
972 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DGS-6604 m show ip dhcp pool
CLI Reference Guide
628
Subnet The bit combination with the address of the DHCP address pool
Lease The duration of the lease for an IP address
Accept client ID To validate the DHCP Client Identifier value sent by the client or not
Accept relay agent
Accept DHCP packet contains option82 or not.
This control can be one of the following configurations:
Remote-ID & Circuit-ID,
Remote ID
Circuit-ID
No.
Domain name
The domain name for DHCP clientBoot fileThe name of the default
boot image for a Dynamic Host Configuration Protocol (DHCP)
client
Next server The configured IP addresses of next-server
Default router The default router list for a DHCP client
DNS server The IP address list of DNS server available to DHCP clients.
NetBIOS node type the NetBIOS node type
NetBIOS scpoe ID the NetBIOS scope id
WINS server The IP address of WINS server
Based-on mac-address The address binding rule based on MAC
Based-on client ID The address binding rule based on Client ID
Based-on C-VID The address binding rule based on customer vlan id
Based-on S-VID The address binding rule based on service provider vlan id
Based-on interface-ip-address The address binding rule based on ingress interface IP
Based-on relay-ip-address The address binding rule based on IP address of relay agent
Based-on vendor-class The address binding rule based on vendor class (option60)
Based-on user-class The address binding rule based on user class (option77)
Number of leased address
The number of addresses has been leased.
Number of conflict addresses The number of addresses are conflict with other clients.
Field Description

Table of Contents

Other manuals for D-Link DGS-6600-48TS

Related product manuals