DGS-6604 m show snmp
CLI Reference Guide
751
This example is sample output from the command show snmp view.
This example is sample output from the command show snmp group.
Switch# show snmp view
View Name Subtree View Type
-----------------------------------------------------
restricted 1.3.6.1.2.1.1 Included
restricted 1.3.6.1.2.1.11 Included
restricted 1.3.6.1.6.3.10.2.1 Included
restricted 1.3.6.1.6.3.11.2.1 Included
restricted 1.3.6.1.6.3.15.1.1 Included
CommunityView 1 Included
CommunityView 1.3.6.1.6.3 Excluded
CommunityView 1.3.6.1.6.3.1 Included
Total Entries: 8
Switch#
Switch# show snmp group
groupname: ILMI security model:v1
readview :*ilmi writeview: *ilmi
notifyview: <no notifyview specified>
row status: active
groupname: ILMI security model:v2c
readview : *ilmi writeview: *ilmi
notifyview: <no notifyview specified>
row status: active
groupname: public security model:v1
readview : <no readview specified> writeview: <no writeview specified>
notifyview: *tv.FFFFFFFF.FFFFFFFF.FFFFFFFF0F
row status: active
groupname: public security model:v2c
readview : <no readview specified> writeview: <no writeview specified>
notifyview: *tv.FFFFFFFF.FFFFFFFF.FFFFFFFF0F
row status: active
Total Entries: 4
Switch#
To Next Page
Loading...
