DGS-6604 m
CLI Reference Guide
791
show ip dhcp snooping
Use this command to display DHCP snooping configuration.
show ip dhcp snooping
Syntax Not Applicable
Default Not Applicable
Command Mode EXEC mode or any configuration mode
Usage Guideline Use the command to display DHCP snooping configuration setting.
Example This example shows how to display DHCP Snooping configuration:
Switch# show ip dhcp snooping
DHCP Snooping is enabled.
DHCP Snooping is enabled on VLANs:
vlan10 vlan15 vlan16 vlan17 vlan18
Verify MAC address is Enabled
Information option: not allowed
Interface Trusted
---------- ----------
eth3.1 no
eth3.8 no
eth3.9 yes
Switch#
To Next Page
Loading...
