DGS-6604 boot config
CLI Reference Guide
80
The specified URL must be represented by an absolute path. It cannot be
represented by a relative path.
Examples The following example shows how to specify the file switch-config as the startup
configuration file:
Verify the settings by entering the show boot command.
The following example shows the result of specifying the incorrectly formed file
yyy-config as the startup configuration file.
T
Switch# configure terminal
Switch(config)# boot config flash:\switch-config
Switch(config)# end
Switch# configure terminal
Switch(config)# boot config flash:\yyy-config.exe
Illegal configuration file
Switch(config)# end
To Next Page
Loading...
