Grandstream Networks UCM630X Series - Page 145

P a g e | 145
UCM630X Series User Manual
Version 1.0.11.10
Firmware Upgrade Rule
Specify how firmware upgrading and provisioning requests are to be sent.
Zero Config
Select either to enable or disable Zero Config.
Web Access
Admin Password
Configure the administrator password for admin-level login.
End-User Password
Configure the end-user password for the end-user level login.
Web Access Mode
Select HTTP or HTTPS as the web access protocol.
Web Server Port
Configure the port for web access.
The valid range is 1 to 65535.
RTSP Port
Configure the RTSP Port.
Enable UPnP Discovery
Select either to enable or disable Enable UPnP Discovery
Login Settings
Configure the login settings.
User Login Timeout
Configure User Login Timeout.
Maximum Consecutive
Failed Login Attempts
Configure Maximum Consecutive Failed Login Attempts.
Login Error Lock Time
Configure Login Error Lock Time.
Security
Disable Telnet/SSH
Enable Telnet/SSH access for the SIP end device. If the SIP end device
supports Telnet access, this option controls the Telnet access of the device;
if the SIP end device supports SSH access, this option controls the SSH
access of the device.
Syslog
Syslog Server
Configure the URL/IP address for the Syslog server.
Syslog Level
Select the level of logging for Syslog.
Send SIP Log
Configure whether the SIP log will be included in the Syslog message.