Select to assign this model template as the default model template. The value
of the option in the default model template will be overridden if another
selected model template has a different value for the same option.
• Click on to edit the model template.
The editing window for a model template is shown in the following figure. In the “Options” field, enter the
option name key word, the option that contains the keyword will be listed. The user could then select the
option to be modified under the model template.
Once added, the option will be shown in the list below. On the left side of each option, users can click on
to remove this option from the model template. On the right side of each option, users can click on to
reset the option to the default value.
The user could also click on “Add New Field” to add a P-value number and the value to the configuration. The
following figure shows setting P-value “P1362” to “en”, which means the display language on the LCD is set to
English. For P-value information of different models, please refer to the configuration template here
https://www.grandstream.com/support/tools.
To Next Page
Loading...
