UCM630X Series User Manual
Version 1.0.11.10
Configure voicemail password (digits only) for the user to access the voicemail box.
A random numeric password is automatically generated. It is recommended to use
the randomly generated password for security purposes.
Skip Voicemail
Password
Verification
When a user dials voicemail code, the password verification IVR is skipped. If
enabled, this would allow one-button voicemail access. By default, this option is
disabled.
Send Voicemail
Email Notification
Configures whether to send emails to the extension's email address to notify of a new
voicemail.
Attach Voicemail
to Email
Configures whether to attach a voicemail audio file to the voicemail notification emails.
Note: When set to “Default”, the global settings in Call Features → Voicemail →
Voicemail Email Settings will be used.
Keep Voicemail
after Emailing
Whether to keep the local voicemail recording after sending them. If set to “Default”,
the global settings will be used.
Note: When set to “Default”, the global settings in Call Features → Voicemail →
Voicemail Email Settings will be used.
If enabled, an empty SDP packet will be sent to the SIP server periodically to keep
the NAT port open. The default setting is "No".
Configure the Keep-alive interval (in seconds) to check if the host is up. The default
setting is 60 seconds.
If enabled, (1) Call Forward, Call Waiting, and Do Not Disturb settings will not work,
(2) Concurrent Registrations can be set only to 1, and (3) Private numbers can be
added in Call Features→SCA page.
CallerID name that will be used for emergency calls and callbacks.
If selected, this extension will be disabled on the UCM630X.
Note: The disabled extension still exists on the PBX but cannot be used on the end
device.
If enabled, the extension can be registered to and accessed via Wave. If disabled,
Wave cannot be used, but regular registration and calling functionality will still work.
To Next Page
Loading...
