UCM630X Series User Manual
Version 1.0.11.10
Set the external number to ring simultaneously. ‘-’ is the connection character that will
be ignored.
Time Condition for
Ring
Simultaneously
Ring the external number simultaneously along with the extension based on this time
condition.
Use callee DOD on
FWD or RS
Use the callee's DOD number as CallerID on Outgoing Forwarding or Ring
Simultaneously calls.
Monitor privilege control
Members of the list can spy on this extension via feature codes.
Seamless transfer privilege control
Allowed to
seamless transfer
Members of the list can seamlessly transfer via feature code.
Configure the number of seconds to ring the user before the call is forwarded to
voicemail (voicemail is enabled) or hang up (voicemail is disabled). If not specified,
the default ring timeout is 60 seconds on the UCM630X, which can be configured in
the global ring timeout setting under Web GUI→PBX Settings→Voice
Prompt→Custom Prompt: General Preference. The valid range is between 5 seconds
and 600 seconds.
Note: If the endpoint also has a ring timeout configured, the actual ring timeout used
is the shortest time set by either device.
Enable automatic recording for the calls using this extension. The default setting is
disabled. The recording files can be accessed under Web GUI→CDR→Recording
Files.
• If set to “Yes”, users can skip entering the password when making outbound calls.
• If set to “By Time”, users can skip entering the password when making outbound
calls during the selected time condition.
To Next Page
Loading...
Need help?
General
