Grandstream Networks UCM630X Series User Manual

P a g e | 210
UCM630X Series User Manual
Version 1.0.11.10
A random password in digits will be automatically generated. It is recommended
to use this password for security purposes.
• Use Extension as Password.
• Enter a password to be used on all the extensions in the batch.
Send Voicemail to
Email
Send voicemail messages to the configured email address. If set to "Default", the
global setting will be used. Global settings can be found in Voicemail → Voicemail
Email Settings.
Keep Voicemail
after Emailing
Only applies if extension-level or global Send Voicemail to Email is enabled.
Auto Record
Enable automatic recording for the calls using this extension. The default setting is
disabled. The recording files can be accessed under Web GUI→CDR→Recording
Files.
Skip Voicemail
Password
Verification
When a user dials voicemail code, the password verification IVR is skipped. If
enabled, this would allow one-button voicemail access. By default, this option is
disabled.
Disable This
Extension
Check this box to disable this extension.
Language
Select voice prompt language for this extension. If set to "Default", the global setting
for voice prompt language will be used.
IAX Settings
Max Number of Calls
Configure the maximum number of calls allowed for each remote IP address.
Require Call Token
Configure to enable/disable requiring call token. If set to "Auto", it might lock out
users who depend on backward compatibility when peer authentication credentials
are shared between physical endpoints.
The default setting is "Yes".
SRTP
Enable/disable SRTP for RTP stream encryption.
ACL Policy
Access Control List manages the IP addresses that can register to this extension.
• Allow All: Any IP address can register to this extension.

Grandstream Networks UCM630X Series Specifications

General

Brand	Grandstream Networks
Model	UCM630X Series
Category	Conference System
Language	English