UCM630X Series User Manual
Version 1.0.11.10
Configure the Call Forward Busy target number.
Select time condition for Call Forward Busy. The available time conditions are “Office
Time”, “Out of Office Time”, “Holiday”, “Out of Holiday”, “Out of Office Time or Holiday”,
and “Specific”.
Notes:
• “Specific” has higher priority to “Office Times” if there is a conflict in terms of time
period.
• Specific time can be configured on the bottom of the extension configuration
dialog. Scroll down the add Time Condition for a specific time.
• Office Time and Holiday could be configured on page System Settings→Time
Settings→Office Time/Holiday page.
If Do Not Disturb is enabled, all incoming calls will be dropped.
All call forward settings will be ignored.
Select time condition for Do Not Disturb. The available time conditions are “Office
Time”, “Out of Office Time”, “Holiday”, “Out of Holiday”, “Out of Office Time or Holiday”,
and “Specific”.
Notes:
• “Specific” has higher priority to “Office Times” if there is a conflict in terms of time
period.
• Specific time can be configured on the bottom of the extension configuration
dialog. Scroll down the add Time Condition for a specific time.
• Office Time and Holiday could be configured on page System Settings→Time
Settings→Office Time/Holiday page.
If DND is enabled, calls from the whitelisted numbers will not be rejected. Multiple
numbers are supported and must be separated by new lines. Pattern matching is
supported.
• Z match any digit from 1-9，
• N match any digit from 2-9，
• X match any digit from 0-9.
To Next Page
Loading...
Need help?
General
