UCM630X Series User Manual
Version 1.0.11.10
• [12345-9] ... Any digit in the brackets. In this example, 1,2,3,4,5,6,7,8,9 is
allowed.
• N ... Any digit from 2-9.
• . ... Wildcard, matching one or more characters.
• ! ... Wildcard, matching zero or more characters immediately.
• X ... Any digit from 0-9.
• Z ... Any digit from 1-9.
• - ... Hyphen is to connect characters and it will be ignored.
• [] Contain special characters ([x], [n], [z]) represent letters x, n, z.
After creating the outbound route, users can choose to enable and disable it. If the
route is disabled, it will not take effect anymore. However, the route settings will
remain in UCM. Users can enable it again when it is needed.
Configure the password for users to use this rule when making outbound calls.
If your local country code is affected by the outbound blacklist, please enter it here
to bypass the blacklist.
Enable to configure the maximum duration for the call using this outbound route.
Configure the maximum duration of the call (in seconds). The default setting is 0,
which means no limit.
Configure the warning time for the call using this outbound route. If set to x
seconds, the warning tone will be played to the caller when x seconds are left to
end the call.
If enabled, calls using this route will automatically be recorded.
Configure the warning repeat interval for the call using this outbound route. If set
to X seconds, the warning tone will be played every x seconds after the first
warning.
To Next Page
Loading...
Need help?
General
