Grandstream Networks UCM630X Series - Page 282

P a g e | 282
UCM630X Series User Manual
Version 1.0.11.10
configured in "DID destination". If the dialed number matches the DID
pattern, the call will be allowed to go through.
• Dial By Name
• Callback
Strip
Specify the number of digits to strip from the beginning of the DID. This is
used when "By DID" is selected in "Default Destination".
Prepend
Specify the digits to be prepended before the call is placed via the trunk.
Those digits will be prepended after the dialing number is stripped.
Time Condition
Start Time
Select the start time "hour:minute" for the trunk to use the inbound rule.
End Time
Select the end time "hour:minute" for the trunk to use the inbound rule.
Date
Select "By Week" or "By Day" and specify the date for the trunk to use the
inbound rule.
Week
Select the day in the week to use the inbound rule.
Destination
Select the destination for the inbound call under the defined time condition.
• Extension
• Voicemail
• Conference Room
• Call Queue
• Ring Group
• Paging/Intercom
• Voicemail Group
• DISA
• IVR
• By DID
When "By DID" is used, the UCM will look for the destination based on