UCM630X Series User Manual
Version 1.0.11.10
• Default Code: *12
• This code is for the user who wants to cancel Call Completion
request.
Check this box to enable spy feature codes. Disabled by default.
• Default Code: *54 (“Enable Spy” needs to be checked)
• This is the feature code to listen in on a call to monitor
performance. Monitor’s line will be muted, and neither party will
hear from the monitor’s extension.
• Default Code: *55 (“Enable Spy” needs to be checked)
• This is the feature code to speak to one side of the call (for
example, whisper to employees to help them handle a call).
Only one side will be able to hear from the monitor’s extension.
• Default Code: *56 (“Enable Spy” needs to be checked)
• This is the feature code to join in on the call to assist both
parties.
• Default Code: *36
• Dial this code to access UCM wakeup service, you can add,
update, activate or deactivate wakeup service.
• Default Code: *35
• Dial this code to access UCM PMS wakeup service, you can
add, update, activate or deactivate PMS wakeup service.
PMS Remote Wakeup Service
• Default Code: *37
• Allows the user to add, update, activate, and deactivate PMS
wakeup service for other extensions.
• Default Code: *23
• Use this code with maid code to update PMS room status.
Choose the status to set after hearing the prompt, for example:
for maid 001 dial *23001 and then 1 after hearing the prompt.
To Next Page
Loading...
Need help?
General
