NETGEAR M4300 User Manual

Configure System Information
145
M4300 Series and M4300-96X Fully Managed Switches User Manual
5. Select System > LLDP > LLDP-MED > Remote Device Information.
6. Use Interface to select the ports on which LLDP-MED is enabled.
The following table describes the LLDP-MED Remote Device Information fields.
Table 50. LLDP-MED Remote Device Information
Field Description
Capability Information: The supported and enabled capabilities that was received in MED TLV on
this port.
Supported Capabilities Specifies supported capabilities that was received in MED TLV on this
port.
Enabled Capabilities Specifies enabled capabilities that was received in MED TLV on this
port.
Device Class Specifies device class as advertised by the device remotely connected
to the port.

NETGEAR M4300 Specifications

General

Model	M4300
Form Factor	Rack-Mountable
Layer	Layer 3
Stackable	Yes
Managed	Yes
Memory	Varies by model
Flash Memory	Varies by model
Warranty	Lifetime
Ports	Varies by model (24 or 48 ports)
PoE	Available on some models
Port Speed	10/100/1000 Mbps, 10Gbps on uplinks
Forwarding Rate	Varies by model
Jumbo Frame Support	Yes
VLAN Support	Yes
Quality of Service (QoS)	Yes
Security Features	ACLs, 802.1X
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	0° to 50° C (32° to 122° F)
Power Supply	Internal
Uplink Ports	Varies by model (SFP/SFP+ or 10G SFP+)