Configure Switching Information
244
M4300 Series and M4300-96X Fully Managed Switches User Manual
6. Use MLD Snooping Admin Mode to select the administrative mode for MLD snooping for
the switch. The default is Disable.
7. Select the Proxy Querier Mode Enable or Disable radio button.
This enables or disables an MLD proxy querier on the system. If it is disabled, then an
MLD proxy query with source IP 0::0 is not sent in response to an MLD leave packet. If it
is enabled, then MLD proxy queries are sent.
The default value is Enable.
8. Click the Apply
button.
Your settings are saved.
The following table describes the nonconfigurable MLD Snooping Configuration fields.
Table 88. MLD Snooping Configuration
Field Definition
Multicast Control Frame Count The number of multicast control frames that have been processed by
the CPU.
Interfaces Enabled for MLD
Snooping
One or more interfaces on which MLD snooping is administratively
enabled. MLD snooping must be enabled globally and on an interface
for the interface to be able to snoop MLD packets to determine which
segments should receive multicast packets directed to the group
address.
VLAN IDs Enabled For MLD
Snooping
Displays one or more VLANs on which MLD snooping is
administratively enabled.
To Next Page
Loading...
