NETGEAR M4300 User Manual

Configure Switching Information
277
M4300 Series and M4300-96X Fully Managed Switches User Manual
6. To refresh the page with the latest information on the switch, click the Update button.
7. To clear the statistics for one or more ports, do the following:
a. Select the check box next to the interface or interfaces.
b. Click the
Clear button.
The statistics are cleared.
The following table describes the nonconfigurable information that the MMRP Global
Statistics page displays.
Table 99. MMRP Global Statistics
Field Description
Interface In the MMRP Statistics table, this field identifies the interface associated with
the rest of the data in the row.
Frames Received The number of MMRP frames that were received on the device or on the
particular interface.
Bad Header The number of MMRP frames with bad headers that were received on the
switch.
Bad Format The number of MMRP frames with bad PDUs body formats that were received
on the switch.
Frames T
ransmitted The number of MMRP frames that were transmitted on the switch.
Transmission Failures The number of MMRP frames that the switch failed to transmit.

NETGEAR M4300 Specifications

General

Model	M4300
Form Factor	Rack-Mountable
Layer	Layer 3
Stackable	Yes
Managed	Yes
Memory	Varies by model
Flash Memory	Varies by model
Warranty	Lifetime
Ports	Varies by model (24 or 48 ports)
PoE	Available on some models
Port Speed	10/100/1000 Mbps, 10Gbps on uplinks
Forwarding Rate	Varies by model
Jumbo Frame Support	Yes
VLAN Support	Yes
Quality of Service (QoS)	Yes
Security Features	ACLs, 802.1X
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	0° to 50° C (32° to 122° F)
Power Supply	Internal
Uplink Ports	Varies by model (SFP/SFP+ or 10G SFP+)