NETGEAR M4300 - Page 290

Routing
290
M4300 Series and M4300-96X Fully Managed Switches User Manual
6. Use Static to specify the static route preference value in the router.
The default value is 1. The range is 1 to 255.
7. Specify the RIP route preference value in the router
.
The default value is 120. The range is 1 to 255.
8. Specify the OSPF Intra route preference value in the router.
The default value is 1
10. The range is 1 to 255. The OSPF specification (RFC 2328)
requires that preferences must be given to the routes learned through OSPF in the
following order: intra < inter < type-1 < type-2.
9. Specify the OSPF Inter route preference value in the router.
The default value is 1
10. The range is 1 to 255. The OSPF specification (RFC 2328)
requires that preferences must be given to the routes learned through OSPF in the
following order: intra < inter < type-1 < type-2.
10. Specify the OSPF External route preference value in the router.
The default value is 1
10. The range is 1 to 255. The OSPF specification (RFC 2328)
requires that preference value must be the same for all the OSPF external route types,
such as type1/type2/nssa1/nssa2.
11. Click the Apply button.
Your settings are saved.
The Local field displays the local route preference value.