NETGEAR M4300 - Page 343

Routing
343
M4300 Series and M4300-96X Fully Managed Switches User Manual
5. Select Routing > VRRP > Advanced > VRRP Tracking Configuration.
6. From the VRRP Interface and VRRP ID menus, select a virtual router.
The virtual routers are listed by interface number and VRRP ID.
7. From the
Tracked Interface
menu, select a routing interface.
The menu lists all routing interfaces that are not yet tracked for the VRRP ID and
interface configuration. The menu does not list the loopback interfaces and tunnels that
could not be tracked.
8. In the Priority Decrement
field, enter priority decrement value the for the tracked interface.
The valid range is 1 to 254. The default value is 10.
The nonconfigurable Tracked Interface State field displays the state of the tracked
interface.
9. In the Tracked Route Prefix field, enter the prefix of the route.
10. In the
Tracked Route Prefix Length field, enter the prefix length of the route.
1
1. In the Priority Decrement field, enter priority decrement value the for the route.
The valid range is 1 to 254. The default value is 10.
The nonconfigurable Reachable field displays the reachability of the tracked route.
12. Click the Add button.
The traced interface or tracked route is added to the VRRP.
13. Click the Apply button.