Multicast Routing
452
M4300 Series and M4300-96X Fully Managed Switches User Manual
3. Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select Routing> IPv6 Multicast > MLD > Proxy Interface Configuration.
6. In the Interface list, select the interface.
7. In the Admin Mode list, select Enable or Disable.
This sets the administrative status of MLD proxy on the selected interface. The default is
Disable. Routing, MLD, and Multicast global admin modes must be enabled to enable
MLD proxy interface mode.
8. In the Unsolicited Report Interval field, enter the unsolicited time interval value in seconds.
The unsolicited report interval is the time between repetitions of a host's initial report of
membership in a group. V
alid values are 1 to 260.
The default value is 1.
9. Click the Apply button.
Your settings are saved.
The following table describes the nonconfigurable information that is displayed.
Table 176. IPv6 Multicast MLD Proxy Interface Configuration
Field Description
IPv6 Prefix The IPv6 address of the MLD proxy interface.
Prefix Length The prefix length for the IPv6 address of the MLD proxy interface.
Operational Mode The operational state of MLD proxy interface.
To Next Page
Loading...
