Configure Quality of Service
485
M4300 Series and M4300-96X Fully Managed Switches User Manual
The login window opens.
3. Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select QoS > DiffServ > Advanced > Service Statistics.
6. Use the Search menu to search for Dif
fServ statistics by interface or member class:
• To search by interface, select Interface, enter the interface in unit/slot/port format (for
example, 1/0/13), and click the
Go button.
If the entry exists, the entry is displayed as the first entry, followed by the remaining
entries.
• To search by member class, select Member Class, enter the member class, and click
the Go button.
If an entry with a matching member class exists, the entry is displayed as the first
entry, followed by the remaining entries. An exact match is required.
7. To refresh the page with the latest information on the switch, click the Update button.
The following table describes the information available on the Service Statistics page.
Table 186. DiffServ Service Statistics
Field Description
Interface List of all valid slot number and port number combinations in the
system with a DiffServ policy currently attached in In direction.
Direction List of the traf
fic direction of interface as In. Shows only the direction(s)
for which a DiffServ policy is currently attached.
To Next Page
Loading...
